I have no ide how to control my motor (MX-28) I thought that it was a good idea buy OPEN CM 485 Exp Board for update MX-28’s controller with R+ Manager, I did it (update Protocol v2.0), but the problem was that I did my program on ROBOTIS_OPENCM.exe so now I can´t control my motor, I guess the previ…

To downgrade to protocol V1.0, I advise you to follow this link : [image] MX-28/64 firmware issues Support I went further : to upgrade the Dynamixel to the good version (36 for MX-28 or 64), download the Roboplus 1.1.3 http://en.robotis.com/BlueAD/board.php?bbs_id=downlo…

Mx-28 firmware issues, How to downgrade to protocol V1.0

Support

Thot June 12, 2018, 7:25pm 5

The Robotis site has changed but the roboplus software 1.1.3 is not deleted. It is available here :

1 Like

Problems to id the dynamixels

Topic		Replies	Views
MX-28/64 firmware issues Support	11	3567	April 25, 2017
Motors work with the same protocol english	5	883	May 21, 2018
Dynamixel RX series Technology benchmark , english , actuators	8	3553	March 24, 2016
XL-320 and MX-28 of the same network Technology electronics , english	3	1685	January 13, 2016
Faults in or Improvements that can be made to Dynamixel Firmware Technology electronics , english	6	2965	January 5, 2017

Mx-28 firmware issues, How to downgrade to protocol V1.0

Related topics